OSB, MDF & Chipboard delivery in Long Eaton

OSB, MDF & Chipboard available for Long Eaton delivery

• HardboardThin sheets for protection and backing.
• Standard MDFSmooth, stable sheets for internal joinery and shelving.
• OSB3Load-bearing board for humid conditions: floors, roofs, sheathing and site hoardings.
• OSB3 tongue and grooveFlooring-grade OSB that locks together over joists.
• Moisture-resistant MDFFor bathrooms, kitchens and window boards.

Estimating your OSB, MDF and chipboard

Decking 36 m² with 2440 × 1220 mm sheets takes 14 sheets including 10% for cutting. In P5 chipboard flooring (2400 × 600 mm) the same floor takes 28 boards.

Planning the drop in Long Eaton

Sheets come in packs on the lorry bed, crane-lifted or hand-offloaded. Long Eaton is inside our standard mainland delivery area.

• If neighbours share the access, it helps to let them know a lorry is coming.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.

Choosing OSB, MDF and chipboard

Cutting MDF safely

MDF dust is fine; cut with extraction and wear suitable respiratory protection.

Which flooring?

P5 chipboard flooring is the standard moisture-resistant floor deck. 18 mm is common at 400 mm joist centres and 22 mm at 600 mm centres, but follow the maker's span table.

Your questions answered

Can you deliver OSB, MDF and chipboard to a site with restricted access in Long Eaton?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Is there a minimum order for delivery to Long Eaton?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

What is OSB3?

OSB3 is oriented strand board graded for load-bearing use in humid conditions under BS EN 300. It is the common grade for floors, roofs and sheathing.

What size are flooring boards?

Chipboard flooring is commonly 2400 × 600 mm with tongue-and-groove on all four edges.