Order OSB, MDF and chipboard for delivery in Isleworth

Which OSB, MDF and chipboard can you order in Isleworth?

• HardboardThin sheets for protection and backing.
• Standard MDFSmooth, stable sheets for internal joinery and shelving.
• OSB3Load-bearing board for humid conditions: floors, roofs, sheathing and site hoardings.
• P5 chipboard flooringMoisture-resistant tongue-and-groove floor decking.

Before you order OSB, MDF and chipboard

Cutting MDF safely

MDF dust is fine; cut with extraction and wear suitable respiratory protection.

OSB or plywood?

OSB3 is usually cheaper and fine for most structural decking in humid conditions. Plywood is stiffer, takes fixings near edges better and performs better where it may get wet.

Delivery to Isleworth: what helps

Sheets come in packs on the lorry bed, crane-lifted or hand-offloaded. Isleworth is inside our standard mainland delivery area.

• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• In summer Isleworth gets around 16h 38m of daylight, but early deliveries still beat the traffic and give the longest working day.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.

Working out quantities for your Isleworth job

Decking 8 m² with 2440 × 1220 mm sheets takes 3 sheets including 10% for cutting. In P5 chipboard flooring (2400 × 600 mm) the same floor takes 7 boards.

Ordering OSB, MDF and chipboard for Isleworth: FAQs

Do you deliver OSB, MDF and chipboard to trades and homeowners in Isleworth?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Can I add other materials to my Isleworth delivery?

Yes. Put everything on one list, from OSB, MDF and chipboard to fixings and PPE, and we will price it as one delivery where the products can travel together.

What is OSB3?

OSB3 is oriented strand board graded for load-bearing use in humid conditions under BS EN 300. It is the common grade for floors, roofs and sheathing.

What chipboard flooring should I use?

P5 moisture-resistant tongue-and-groove chipboard. 18 mm is common on joists at 400 mm centres and 22 mm at 600 mm centres.