OSB, MDF & Chipboard delivered to Haverfordwest

What OSB, MDF and chipboard can we deliver to Haverfordwest?

• OSB3Load-bearing board for humid conditions: floors, roofs, sheathing and site hoardings.
• P5 chipboard flooringMoisture-resistant tongue-and-groove floor decking.
• OSB3 tongue and grooveFlooring-grade OSB that locks together over joists.
• Moisture-resistant MDFFor bathrooms, kitchens and window boards.
• Standard MDFSmooth, stable sheets for internal joinery and shelving.

Working out quantities for your Haverfordwest job

Decking 30 m² with 2440 × 1220 mm sheets takes 12 sheets including 10% for cutting. In P5 chipboard flooring (2400 × 600 mm) the same floor takes 23 boards.

Choosing OSB, MDF and chipboard

OSB or plywood?

OSB3 is usually cheaper and fine for most structural decking in humid conditions. Plywood is stiffer, takes fixings near edges better and performs better where it may get wet.

Which flooring?

P5 chipboard flooring is the standard moisture-resistant floor deck. 18 mm is common at 400 mm joist centres and 22 mm at 600 mm centres, but follow the maker's span table.

Before your Haverfordwest delivery arrives

Sheets come in packs on the lorry bed, crane-lifted or hand-offloaded. Haverfordwest is inside our standard mainland delivery area.

• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.

Questions about OSB, MDF and chipboard delivery in Haverfordwest

Can OSB get wet?

OSB3 copes with humid conditions and short exposure during construction, but it should not be left in the rain for long or used where it stays wet.

Can you deliver OSB, MDF and chipboard to a site with restricted access in Haverfordwest?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

What chipboard flooring should I use?

P5 moisture-resistant tongue-and-groove chipboard. 18 mm is common on joists at 400 mm centres and 22 mm at 600 mm centres.

Can I add other materials to my Haverfordwest delivery?

Yes. Put everything on one list, from OSB, MDF and chipboard to fixings and PPE, and we will price it as one delivery where the products can travel together.