OSB, MDF & Chipboard for Hastings, delivered to site

Our OSB, MDF and chipboard range for Hastings jobs

• P5 chipboard flooringMoisture-resistant tongue-and-groove floor decking.
• Standard MDFSmooth, stable sheets for internal joinery and shelving.
• OSB3Load-bearing board for humid conditions: floors, roofs, sheathing and site hoardings.
• Moisture-resistant MDFFor bathrooms, kitchens and window boards.
• OSB3 tongue and grooveFlooring-grade OSB that locks together over joists.

Before your Hastings delivery arrives

Sheets come in packs on the lorry bed, crane-lifted or hand-offloaded. Hastings is inside our standard mainland delivery area.

• Give us the full postcode for the drop point; deliveries around TN34 are priced to the exact address.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.

Picking the right product

Which flooring?

P5 chipboard flooring is the standard moisture-resistant floor deck. 18 mm is common at 400 mm joist centres and 22 mm at 600 mm centres, but follow the maker's span table.

OSB or plywood?

OSB3 is usually cheaper and fine for most structural decking in humid conditions. Plywood is stiffer, takes fixings near edges better and performs better where it may get wet.

How much will you need?

Decking 18 m² with 2440 × 1220 mm sheets takes 7 sheets including 10% for cutting. In P5 chipboard flooring (2400 × 600 mm) the same floor takes 14 boards.

Common questions from Hastings

Can you deliver OSB, MDF and chipboard to a site with restricted access in Hastings?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

What is OSB3?

OSB3 is oriented strand board graded for load-bearing use in humid conditions under BS EN 300. It is the common grade for floors, roofs and sheathing.

What chipboard flooring should I use?

P5 moisture-resistant tongue-and-groove chipboard. 18 mm is common on joists at 400 mm centres and 22 mm at 600 mm centres.

Do you deliver OSB, MDF and chipboard to Hastings?

Yes. We deliver across Hastings, including TN34, TN38, TN35, TN37. Hastings is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.