OSB, MDF & Chipboard delivery in Exmouth

Our OSB, MDF and chipboard range for Exmouth jobs

• OSB3Load-bearing board for humid conditions: floors, roofs, sheathing and site hoardings.
• OSB3 tongue and grooveFlooring-grade OSB that locks together over joists.
• Standard MDFSmooth, stable sheets for internal joinery and shelving.
• P5 chipboard flooringMoisture-resistant tongue-and-groove floor decking.
• Moisture-resistant MDFFor bathrooms, kitchens and window boards.

Delivering OSB, MDF and chipboard in Exmouth

Sheets come in packs on the lorry bed, crane-lifted or hand-offloaded. Exmouth is inside our standard mainland delivery area.

• If the site is up a shared drive or behind other houses, tell us the distance from the road.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.

OSB, MDF & Chipboard: choosing well

Cutting MDF safely

MDF dust is fine; cut with extraction and wear suitable respiratory protection.

Which flooring?

P5 chipboard flooring is the standard moisture-resistant floor deck. 18 mm is common at 400 mm joist centres and 22 mm at 600 mm centres, but follow the maker's span table.

Sizing your order

Decking 15 m² with 2440 × 1220 mm sheets takes 6 sheets including 10% for cutting. In P5 chipboard flooring (2400 × 600 mm) the same floor takes 12 boards.

OSB, MDF & Chipboard questions

What is OSB3?

OSB3 is oriented strand board graded for load-bearing use in humid conditions under BS EN 300. It is the common grade for floors, roofs and sheathing.

Can you deliver OSB, MDF and chipboard to a site with restricted access in Exmouth?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Is there a minimum order for delivery to Exmouth?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

What size are flooring boards?

Chipboard flooring is commonly 2400 × 600 mm with tongue-and-groove on all four edges.