OSB, MDF & Chipboard delivered to Dunstable

Which OSB, MDF and chipboard can you order in Dunstable?

• Standard MDFSmooth, stable sheets for internal joinery and shelving.
• OSB3 tongue and grooveFlooring-grade OSB that locks together over joists.
• OSB3Load-bearing board for humid conditions: floors, roofs, sheathing and site hoardings.
• HardboardThin sheets for protection and backing.
• Moisture-resistant MDFFor bathrooms, kitchens and window boards.

How delivery works in Dunstable

Sheets come in packs on the lorry bed, crane-lifted or hand-offloaded. Dunstable is inside our standard mainland delivery area.

• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.

Getting the right OSB, MDF and chipboard

OSB or plywood?

OSB3 is usually cheaper and fine for most structural decking in humid conditions. Plywood is stiffer, takes fixings near edges better and performs better where it may get wet.

Cutting MDF safely

MDF dust is fine; cut with extraction and wear suitable respiratory protection.

Working out quantities for your Dunstable job

Decking 18 m² with 2440 × 1220 mm sheets takes 7 sheets including 10% for cutting. In P5 chipboard flooring (2400 × 600 mm) the same floor takes 14 boards.

Questions about OSB, MDF and chipboard delivery in Dunstable

Do you deliver OSB, MDF and chipboard to trades and homeowners in Dunstable?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

What size are flooring boards?

Chipboard flooring is commonly 2400 × 600 mm with tongue-and-groove on all four edges.

Is there a minimum order for delivery to Dunstable?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

What chipboard flooring should I use?

P5 moisture-resistant tongue-and-groove chipboard. 18 mm is common on joists at 400 mm centres and 22 mm at 600 mm centres.