OSB, MDF & Chipboard delivered to Bedworth

Choosing from our OSB, MDF and chipboard range

• HardboardThin sheets for protection and backing.
• OSB3 tongue and grooveFlooring-grade OSB that locks together over joists.
• P5 chipboard flooringMoisture-resistant tongue-and-groove floor decking.
• OSB3Load-bearing board for humid conditions: floors, roofs, sheathing and site hoardings.
• Moisture-resistant MDFFor bathrooms, kitchens and window boards.

Working out quantities for your Bedworth job

Decking 30 m² with 2440 × 1220 mm sheets takes 12 sheets including 10% for cutting. In P5 chipboard flooring (2400 × 600 mm) the same floor takes 23 boards.

Delivery to Bedworth: what helps

Sheets come in packs on the lorry bed, crane-lifted or hand-offloaded. Bedworth is inside our standard mainland delivery area.

• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
• In summer Bedworth gets around 16h 50m of daylight, but early deliveries still beat the traffic and give the longest working day.

Picking the right product

OSB or plywood?

OSB3 is usually cheaper and fine for most structural decking in humid conditions. Plywood is stiffer, takes fixings near edges better and performs better where it may get wet.

Which flooring?

P5 chipboard flooring is the standard moisture-resistant floor deck. 18 mm is common at 400 mm joist centres and 22 mm at 600 mm centres, but follow the maker's span table.

Common questions from Bedworth

Is there a minimum order for delivery to Bedworth?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can OSB get wet?

OSB3 copes with humid conditions and short exposure during construction, but it should not be left in the rain for long or used where it stays wet.

Do you deliver OSB, MDF and chipboard to trades and homeowners in Bedworth?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

What size are flooring boards?

Chipboard flooring is commonly 2400 × 600 mm with tongue-and-groove on all four edges.