OSB, MDF & Chipboard delivered to Battersea

What OSB, MDF and chipboard can we deliver to Battersea?

• OSB3Load-bearing board for humid conditions: floors, roofs, sheathing and site hoardings.
• P5 chipboard flooringMoisture-resistant tongue-and-groove floor decking.
• HardboardThin sheets for protection and backing.
• OSB3 tongue and grooveFlooring-grade OSB that locks together over joists.

How delivery works in Battersea

Sheets come in packs on the lorry bed, crane-lifted or hand-offloaded. Battersea is inside our standard mainland delivery area.

• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.

How much will you need?

Decking 24 m² with 2440 × 1220 mm sheets takes 9 sheets including 10% for cutting. In P5 chipboard flooring (2400 × 600 mm) the same floor takes 19 boards.

OSB, MDF & Chipboard: choosing well

Cutting MDF safely

MDF dust is fine; cut with extraction and wear suitable respiratory protection.

Which flooring?

P5 chipboard flooring is the standard moisture-resistant floor deck. 18 mm is common at 400 mm joist centres and 22 mm at 600 mm centres, but follow the maker's span table.

OSB, MDF & Chipboard questions

Can you deliver OSB, MDF and chipboard to a site with restricted access in Battersea?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Do you deliver OSB, MDF and chipboard to trades and homeowners in Battersea?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

What chipboard flooring should I use?

P5 moisture-resistant tongue-and-groove chipboard. 18 mm is common on joists at 400 mm centres and 22 mm at 600 mm centres.

Is MDF waterproof?

No. Moisture-resistant MDF handles humid rooms better than standard MDF but must still be sealed and kept out of direct water.