MOT Type 1 Sub-base delivery in Sittingbourne

What MOT Type 1 can we deliver to Sittingbourne?

• Recycled Type 1Crushed recycled aggregate graded as Type 1, where suitable.
• ScalpingsCheaper granular fill for less demanding areas.
• MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.
• HardcoreBroken masonry fill for bulking up ground.
• Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.

How delivery works in Sittingbourne

Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Sittingbourne is inside our standard mainland delivery area.

• If the site is up a shared drive or behind other houses, tell us the distance from the road.
• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
• With roughly 7h 51m of daylight in Sittingbourne around the shortest day, morning deliveries leave more working light for the job.

How much will you need?

A 10 × 5 m area at 100 mm compacted is 5 m³. At about 2.1 tonnes per cubic metre plus 10% that is 11.6 tonnes, or around 14 bulk bags. Try the sub-base calculator

Things to check before you order

Virgin or recycled?

Recycled Type 1 can be a good option where it meets the specification; ask what your project or local authority requires.

How deep?

Patios and paths commonly use around 100 mm of compacted sub-base, and domestic driveways around 150 mm or more. Soft ground or heavier vehicles need more; your designer or installer will confirm.

Common questions from Sittingbourne

Can you deliver MOT Type 1 to a site with restricted access in Sittingbourne?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Is there a minimum order for delivery to Sittingbourne?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How much MOT Type 1 do I need?

Multiply the area by the compacted depth to get cubic metres, then allow about 2.1 to 2.2 tonnes per cubic metre. At 100 mm deep, a tonne covers roughly 4.5 square metres.

Can you tip it loose?

For larger quantities we can price a loose tipped load if the lorry can reach and there is space to tip.