Order MOT Type 1 for delivery in Kilburn

MOT Type 1 Sub-base available for Kilburn delivery

• MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.
• Recycled Type 1Crushed recycled aggregate graded as Type 1, where suitable.
• HardcoreBroken masonry fill for bulking up ground.
• ScalpingsCheaper granular fill for less demanding areas.

Delivering MOT Type 1 in Kilburn

Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Kilburn is inside our standard mainland delivery area.

• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• If neighbours share the access, it helps to let them know a lorry is coming.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.

Choosing MOT Type 1

How deep?

Patios and paths commonly use around 100 mm of compacted sub-base, and domestic driveways around 150 mm or more. Soft ground or heavier vehicles need more; your designer or installer will confirm.

Virgin or recycled?

Recycled Type 1 can be a good option where it meets the specification; ask what your project or local authority requires.

Sizing your order

A 4 × 3 m area at 100 mm compacted is 1.2 m³. At about 2.1 tonnes per cubic metre plus 10% that is 2.8 tonnes, or around 4 bulk bags. Try the sub-base calculator

MOT Type 1 Sub-base in Kilburn: questions

Can you tip it loose?

For larger quantities we can price a loose tipped load if the lorry can reach and there is space to tip.

Do you deliver MOT Type 1 to Kilburn?

Yes. We deliver across Kilburn, including NW6, NW3, NW2. Kilburn is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Can you deliver MOT Type 1 to a site with restricted access in Kilburn?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How much MOT Type 1 do I need?

Multiply the area by the compacted depth to get cubic metres, then allow about 2.1 to 2.2 tonnes per cubic metre. At 100 mm deep, a tonne covers roughly 4.5 square metres.