Cement & Aggregates
Order MOT Type 1 for delivery in Irvine
MOT Type 1 is a crushed stone sub-base, graded from 31.5 mm (often sold as 40 mm) down to dust, that compacts into a firm, free-draining layer under driveways, patios, paths and floor slabs.
Building in Irvine? Send us your list and we will come back with a delivered price for the MOT Type 1 and anything else on it.

Irvine delivery at a glance
- Postcode districts
- KA12, KA11, KA13, KA2
- Nearby (straight line)
- Kilwinning (3 mi), Troon (5 mi), Kilmarnock (6 mi)
- Daylight
- About 7h 02m on the shortest day
- How it arrives
- Bulk bags or tipped loads
- Delivery
- Standard mainland delivery
- Delivering to
- Irvine, Ayrshire
Which MOT Type 1 can you order in Irvine?
- Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.
- MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.
- Recycled Type 1Crushed recycled aggregate graded as Type 1, where suitable.
- HardcoreBroken masonry fill for bulking up ground.
- ScalpingsCheaper granular fill for less demanding areas.
Sizing your order
An 8 × 4 m area at 100 mm compacted is 3.2 m³. At about 2.1 tonnes per cubic metre plus 10% that is 7.4 tonnes, or around 9 bulk bags. Try the sub-base calculator
Delivering MOT Type 1 in Irvine
Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Irvine is inside our standard mainland delivery area.
- For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
- If the site is up a shared drive or behind other houses, tell us the distance from the road.
- Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
Getting the right MOT Type 1
Compaction
Lay and compact in layers with a plate compactor. Allow extra material because it compacts down.
Virgin or recycled?
Recycled Type 1 can be a good option where it meets the specification; ask what your project or local authority requires.
MOT Type 1 Sub-base in Irvine: questions
How much MOT Type 1 do I need?
Multiply the area by the compacted depth to get cubic metres, then allow about 2.1 to 2.2 tonnes per cubic metre. At 100 mm deep, a tonne covers roughly 4.5 square metres.
Can you deliver MOT Type 1 to a site with restricted access in Irvine?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Does Type 1 drain?
Type 1 is reasonably free-draining when compacted, which is one reason it is used under drives and patios.
Is there a minimum order for delivery to Irvine?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
Nearby towns we deliver MOT Type 1 to
- MOT Type 1 Sub-base in Kilwinning
- MOT Type 1 Sub-base in Troon
- MOT Type 1 Sub-base in Kilmarnock
- MOT Type 1 Sub-base in Prestwick
- MOT Type 1 Sub-base in Ayr
- MOT Type 1 Sub-base in Johnstone
Also available in Irvine
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
