MOT Type 1 Sub-base delivery in Hindley

Our MOT Type 1 range for Hindley jobs

• Recycled Type 1Crushed recycled aggregate graded as Type 1, where suitable.
• HardcoreBroken masonry fill for bulking up ground.
• MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.
• Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.

A quick quantity check

A 10 × 5 m area at 150 mm compacted is 7.5 m³. At about 2.1 tonnes per cubic metre plus 10% that is 17.3 tonnes, or around 21 bulk bags. Try the sub-base calculator

Choosing MOT Type 1

Compaction

Lay and compact in layers with a plate compactor. Allow extra material because it compacts down.

How deep?

Patios and paths commonly use around 100 mm of compacted sub-base, and domestic driveways around 150 mm or more. Soft ground or heavier vehicles need more; your designer or installer will confirm.

How delivery works in Hindley

Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Hindley is inside our standard mainland delivery area.

• Give us the full postcode for the drop point; deliveries around WN2 are priced to the exact address.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.

Questions about MOT Type 1 delivery in Hindley

Is there a minimum order for delivery to Hindley?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Do you deliver MOT Type 1 to Hindley?

Yes. We deliver across Hindley, including WN2, WN1, WN3, BL5. Hindley is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Can you tip it loose?

For larger quantities we can price a loose tipped load if the lorry can reach and there is space to tip.

How much MOT Type 1 do I need?

Multiply the area by the compacted depth to get cubic metres, then allow about 2.1 to 2.2 tonnes per cubic metre. At 100 mm deep, a tonne covers roughly 4.5 square metres.