Cement & Aggregates
MOT Type 1 Sub-base for Gerrards Cross, delivered to site
MOT Type 1 is a crushed stone sub-base, graded from 31.5 mm (often sold as 40 mm) down to dust, that compacts into a firm, free-draining layer under driveways, patios, paths and floor slabs.
For jobs in Gerrards Cross we quote MOT Type 1 as a delivered price to your postcode, with the vehicle and offload method agreed up front.

Gerrards Cross delivery at a glance
- Delivering to
- Gerrards Cross, Buckinghamshire
- How it arrives
- Bulk bags or tipped loads
- Postcode districts
- SL9, SL3, SL2, HP9
- Daylight
- About 7h 49m on the shortest day
- Delivery
- Standard mainland delivery
- Nearby (straight line)
- Chalfont St Peter (2 mi), Uxbridge (4 mi), Rickmansworth (5 mi)
Choosing from our MOT Type 1 range
- Recycled Type 1Crushed recycled aggregate graded as Type 1, where suitable.
- MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.
- HardcoreBroken masonry fill for bulking up ground.
- Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.
Choosing MOT Type 1
Compaction
Lay and compact in layers with a plate compactor. Allow extra material because it compacts down.
Virgin or recycled?
Recycled Type 1 can be a good option where it meets the specification; ask what your project or local authority requires.
Before your Gerrards Cross delivery arrives
Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Gerrards Cross is inside our standard mainland delivery area.
- Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
- Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
- Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
How much will you need?
A 4 × 3 m area at 150 mm compacted is 1.8 m³. At about 2.1 tonnes per cubic metre plus 10% that is 4.2 tonnes, or around 5 bulk bags. Try the sub-base calculator
MOT Type 1 Sub-base questions
Can you deliver MOT Type 1 to a site with restricted access in Gerrards Cross?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
What is the difference between Type 1 and scalpings?
Type 1 is graded to a specification so it compacts into a strong, stable layer. Scalpings are less controlled and suit less demanding areas.
Can you tip it loose?
For larger quantities we can price a loose tipped load if the lorry can reach and there is space to tip.
Is there a minimum order for delivery to Gerrards Cross?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
Close to Gerrards Cross
- MOT Type 1 Sub-base in Chalfont St Peter
- MOT Type 1 Sub-base in Uxbridge
- MOT Type 1 Sub-base in Rickmansworth
- MOT Type 1 Sub-base in Slough
- MOT Type 1 Sub-base in Ruislip
- MOT Type 1 Sub-base in Amersham
Complete your Gerrards Cross order
- Treated Carcassing Timber in Gerrards Cross
- Plasterboard in Gerrards Cross
- Steel & Concrete Lintels in Gerrards Cross
- Bagged Concrete & Mortar Mixes in Gerrards Cross
- Mineral Wool Insulation in Gerrards Cross
- Adhesives, Sealants & Foam in Gerrards Cross
- Plywood in Gerrards Cross
- Building & Sharp Sand in Gerrards Cross
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
