MOT Type 1 Sub-base delivered to Formby

What MOT Type 1 can we deliver to Formby?

• HardcoreBroken masonry fill for bulking up ground.
• MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.
• Recycled Type 1Crushed recycled aggregate graded as Type 1, where suitable.
• Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.
• ScalpingsCheaper granular fill for less demanding areas.

Working out quantities for your Formby job

A 10 × 5 m area at 100 mm compacted is 5 m³. At about 2.1 tonnes per cubic metre plus 10% that is 11.6 tonnes, or around 14 bulk bags. Try the sub-base calculator

Planning the drop in Formby

Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Formby is inside our standard mainland delivery area.

• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• On busy streets in Formby, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.

Getting the right MOT Type 1

How deep?

Patios and paths commonly use around 100 mm of compacted sub-base, and domestic driveways around 150 mm or more. Soft ground or heavier vehicles need more; your designer or installer will confirm.

Compaction

Lay and compact in layers with a plate compactor. Allow extra material because it compacts down.

MOT Type 1 Sub-base questions

What is the difference between Type 1 and scalpings?

Type 1 is graded to a specification so it compacts into a strong, stable layer. Scalpings are less controlled and suit less demanding areas.

Can you deliver MOT Type 1 to a site with restricted access in Formby?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Do you deliver MOT Type 1 to trades and homeowners in Formby?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

How much MOT Type 1 do I need?

Multiply the area by the compacted depth to get cubic metres, then allow about 2.1 to 2.2 tonnes per cubic metre. At 100 mm deep, a tonne covers roughly 4.5 square metres.