Cement & Aggregates
Order MOT Type 1 for delivery in Flint
MOT Type 1 is a crushed stone sub-base, graded from 31.5 mm (often sold as 40 mm) down to dust, that compacts into a firm, free-draining layer under driveways, patios, paths and floor slabs.
From CH6 to CH5, we price MOT Type 1 delivered to Flint and confirm the drop point and date when you order.

Delivery facts for Flint
- Nearby (straight line)
- Deeside (5 mi), Buckley (6 mi), Heswall (6 mi)
- Delivery
- Standard mainland delivery
- Postcode districts
- CH6, CH7, CH8, CH5
- Daylight
- About 7h 31m on the shortest day
- Delivering to
- Flint, Clwyd
- How it arrives
- Bulk bags or tipped loads
MOT Type 1 Sub-base available for Flint delivery
- Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.
- HardcoreBroken masonry fill for bulking up ground.
- MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.
- ScalpingsCheaper granular fill for less demanding areas.
- Recycled Type 1Crushed recycled aggregate graded as Type 1, where suitable.
Working out quantities for your Flint job
An 8 × 6 m area at 150 mm compacted is 7.2 m³. At about 2.1 tonnes per cubic metre plus 10% that is 16.6 tonnes, or around 20 bulk bags. Try the sub-base calculator
Planning the drop in Flint
Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Flint is inside our standard mainland delivery area.
- Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
- Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
- In summer Flint gets around 16h 59m of daylight, but early deliveries still beat the traffic and give the longest working day.
Before you order MOT Type 1
Virgin or recycled?
Recycled Type 1 can be a good option where it meets the specification; ask what your project or local authority requires.
Compaction
Lay and compact in layers with a plate compactor. Allow extra material because it compacts down.
MOT Type 1 Sub-base questions
How much MOT Type 1 do I need?
Multiply the area by the compacted depth to get cubic metres, then allow about 2.1 to 2.2 tonnes per cubic metre. At 100 mm deep, a tonne covers roughly 4.5 square metres.
Do you deliver MOT Type 1 to Flint?
Yes. We deliver across Flint, including CH6, CH7, CH8, CH5. Flint is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.
How deep should a driveway sub-base be?
Around 150 mm of compacted MOT Type 1 is common for domestic drives on firm ground; soft ground or heavier vehicles need more. Follow your installer or the paving maker's guidance.
Can you deliver MOT Type 1 to a site with restricted access in Flint?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
MOT Type 1 Sub-base near Flint
- MOT Type 1 Sub-base in Deeside
- MOT Type 1 Sub-base in Buckley
- MOT Type 1 Sub-base in Heswall
- MOT Type 1 Sub-base in Hawarden
- MOT Type 1 Sub-base in Bebington
- MOT Type 1 Sub-base in Ellesmere Port
More materials delivered to Flint
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
