SK Trade, sktrade.co.uk

Cement & Aggregates

Order MOT Type 1 for delivery in Edmonton

MOT Type 1 is a crushed stone sub-base, graded from 31.5 mm (often sold as 40 mm) down to dust, that compacts into a firm, free-draining layer under driveways, patios, paths and floor slabs.

From N18 to N17, we price MOT Type 1 delivered to Edmonton and confirm the drop point and date when you order.

A compacted grey crushed-stone sub-base for a driveway with a plate compactor on it

Your Edmonton delivery

Daylight
About 7h 48m on the shortest day
Delivering to
Edmonton, Greater London
Postcode districts
N18, N9, EN3, N17
Delivery
Standard mainland delivery
Nearby (straight line)
Tottenham (2 mi), Enfield (2 mi), Chingford (3 mi)
How it arrives
Bulk bags or tipped loads

Choosing from our MOT Type 1 range

  • HardcoreBroken masonry fill for bulking up ground.
  • MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.
  • Recycled Type 1Crushed recycled aggregate graded as Type 1, where suitable.
  • Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.

MOT Type 1 Sub-base: choosing well

Compaction

Lay and compact in layers with a plate compactor. Allow extra material because it compacts down.

Virgin or recycled?

Recycled Type 1 can be a good option where it meets the specification; ask what your project or local authority requires.

Planning the drop in Edmonton

Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Edmonton is inside our standard mainland delivery area.

  • On busy streets in Edmonton, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
  • For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
  • Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.

Working out quantities for your Edmonton job

An 8 × 4 m area at 100 mm compacted is 3.2 m³. At about 2.1 tonnes per cubic metre plus 10% that is 7.4 tonnes, or around 9 bulk bags. Try the sub-base calculator

Your questions answered

Is there a minimum order for delivery to Edmonton?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How much MOT Type 1 do I need?

Multiply the area by the compacted depth to get cubic metres, then allow about 2.1 to 2.2 tonnes per cubic metre. At 100 mm deep, a tonne covers roughly 4.5 square metres.

Can you tip it loose?

For larger quantities we can price a loose tipped load if the lorry can reach and there is space to tip.

Can you deliver MOT Type 1 to a site with restricted access in Edmonton?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price