MOT Type 1 Sub-base delivery in Bonnyrigg

Which MOT Type 1 can you order in Bonnyrigg?

• ScalpingsCheaper granular fill for less demanding areas.
• Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.
• MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.
• Recycled Type 1Crushed recycled aggregate graded as Type 1, where suitable.
• HardcoreBroken masonry fill for bulking up ground.

Before your Bonnyrigg delivery arrives

Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Bonnyrigg is inside our standard mainland delivery area.

• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• If the site is up a shared drive or behind other houses, tell us the distance from the road.

Getting the right MOT Type 1

How deep?

Patios and paths commonly use around 100 mm of compacted sub-base, and domestic driveways around 150 mm or more. Soft ground or heavier vehicles need more; your designer or installer will confirm.

Compaction

Lay and compact in layers with a plate compactor. Allow extra material because it compacts down.

Quantities: a worked example

An 8 × 6 m area at 150 mm compacted is 7.2 m³. At about 2.1 tonnes per cubic metre plus 10% that is 16.6 tonnes, or around 20 bulk bags. Try the sub-base calculator

Ordering MOT Type 1 for Bonnyrigg: FAQs

Can you deliver MOT Type 1 to a site with restricted access in Bonnyrigg?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Does Type 1 drain?

Type 1 is reasonably free-draining when compacted, which is one reason it is used under drives and patios.

How soon can MOT Type 1 be delivered in Bonnyrigg?

We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.

How much MOT Type 1 do I need?

Multiply the area by the compacted depth to get cubic metres, then allow about 2.1 to 2.2 tonnes per cubic metre. At 100 mm deep, a tonne covers roughly 4.5 square metres.