MOT Type 1 Sub-base for Bedworth, delivered to site

Which MOT Type 1 can you order in Bedworth?

• HardcoreBroken masonry fill for bulking up ground.
• MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.
• ScalpingsCheaper granular fill for less demanding areas.
• Recycled Type 1Crushed recycled aggregate graded as Type 1, where suitable.
• Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.

Planning the drop in Bedworth

Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Bedworth is inside our standard mainland delivery area.

• On busy streets in Bedworth, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
• If neighbours share the access, it helps to let them know a lorry is coming.

Getting the right MOT Type 1

Compaction

Lay and compact in layers with a plate compactor. Allow extra material because it compacts down.

How deep?

Patios and paths commonly use around 100 mm of compacted sub-base, and domestic driveways around 150 mm or more. Soft ground or heavier vehicles need more; your designer or installer will confirm.

A quick quantity check

An 8 × 6 m area at 100 mm compacted is 4.8 m³. At about 2.1 tonnes per cubic metre plus 10% that is 11.1 tonnes, or around 14 bulk bags. Try the sub-base calculator

MOT Type 1 Sub-base in Bedworth: questions

How much MOT Type 1 do I need?

Multiply the area by the compacted depth to get cubic metres, then allow about 2.1 to 2.2 tonnes per cubic metre. At 100 mm deep, a tonne covers roughly 4.5 square metres.

Can you deliver MOT Type 1 to a site with restricted access in Bedworth?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Do you deliver MOT Type 1 to Bedworth?

Yes. We deliver across Bedworth, including CV12, CV7, CV11, CV10. Bedworth is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

What is the difference between Type 1 and scalpings?

Type 1 is graded to a specification so it compacts into a strong, stable layer. Scalpings are less controlled and suit less demanding areas.