Cement & Aggregates
MOT Type 1 Sub-base delivered to Andover
MOT Type 1 is a crushed stone sub-base, graded from 31.5 mm (often sold as 40 mm) down to dust, that compacts into a firm, free-draining layer under driveways, patios, paths and floor slabs.
SK Trade is a builders' merchant delivering MOT Type 1 into Andover, priced to your postcode and confirmed in writing.

MOT Type 1 Sub-base to Andover: the basics
- Delivering to
- Andover, Hampshire
- Postcode districts
- SP10, SP11
- Daylight
- About 7h 52m on the shortest day
- Delivery
- Standard mainland delivery
- Nearby (straight line)
- Winchester (13 mi), Newbury (15 mi), Salisbury (16 mi)
- How it arrives
- Bulk bags or tipped loads
Our MOT Type 1 range for Andover jobs
- ScalpingsCheaper granular fill for less demanding areas.
- Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.
- HardcoreBroken masonry fill for bulking up ground.
- Recycled Type 1Crushed recycled aggregate graded as Type 1, where suitable.
- MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.
Getting the right MOT Type 1
Compaction
Lay and compact in layers with a plate compactor. Allow extra material because it compacts down.
Virgin or recycled?
Recycled Type 1 can be a good option where it meets the specification; ask what your project or local authority requires.
Delivering MOT Type 1 in Andover
Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Andover is inside our standard mainland delivery area.
- If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
- For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
- Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
Sizing your order
A 5 × 3 m area at 100 mm compacted is 1.5 m³. At about 2.1 tonnes per cubic metre plus 10% that is 3.5 tonnes, or around 5 bulk bags. Try the sub-base calculator
Ordering MOT Type 1 for Andover: FAQs
Is there a minimum order for delivery to Andover?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
How much MOT Type 1 do I need?
Multiply the area by the compacted depth to get cubic metres, then allow about 2.1 to 2.2 tonnes per cubic metre. At 100 mm deep, a tonne covers roughly 4.5 square metres.
Does Type 1 drain?
Type 1 is reasonably free-draining when compacted, which is one reason it is used under drives and patios.
Do you deliver MOT Type 1 to Andover?
Yes. We deliver across Andover, including SP10, SP11. Andover is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.
Also delivering MOT Type 1 nearby
- MOT Type 1 Sub-base in Winchester
- MOT Type 1 Sub-base in Newbury
- MOT Type 1 Sub-base in Salisbury
- MOT Type 1 Sub-base in Thatcham
- MOT Type 1 Sub-base in Basingstoke
- MOT Type 1 Sub-base in Eastleigh
Complete your Andover order
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
