Order metal studs and ceiling sections for delivery in Stamford

Choosing from our metal studs and ceiling sections range

• C studs and U tracksPartition framing in common widths.
• MF ceiling systemPrimary channels, ceiling sections, hangers and edge trims.
• Drywall and wafer screwsSelf-drilling screws for metal framing.
• Deflection headsTo allow for floor and roof movement above partitions.

Quantities: a worked example

A 5.4 m metal stud partition at 600 mm centres needs 10 studs and 10.8 m of track, plus boards and self-drilling screws. Taller walls may need deeper studs or closer centres; follow the system maker's tables.

Getting the right metal studs and ceiling sections

Stud width and height

Taller walls need deeper studs or closer centres; the system maker's height tables show the limits.

Follow the system

Metal stud partitions and ceilings are designed as tested systems with specific boards, sections and screws. Order to the system specification, especially where fire or acoustic ratings apply.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Before your Stamford delivery arrives

Sections come in bundles in long lengths; tell us about access for 3 m plus lengths. Stamford is inside our standard mainland delivery area.

• If the site is up a shared drive or behind other houses, tell us the distance from the road.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.

Metal Stud & Ceiling Systems questions

Is there a minimum order for delivery to Stamford?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can you deliver metal studs and ceiling sections to a site with restricted access in Stamford?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Can metal stud walls be fire rated?

Yes, when built as the tested system with the specified boards, insulation and fixings.

What sizes do metal studs come in?

Common widths are 50, 70, 92 and 146 mm, in lengths to suit wall heights.