Steel & Concrete Lintels for Ipswich, delivered to site

Choosing from our lintels range

• Cavity trays and stop endsTo shed water out of the cavity over openings.
• Steel cavity wall lintelsInsulated galvanised lintels that support both leaves of a cavity wall.
• Heavy-duty and extra-heavy lintelsFor openings carrying floors or a lot of masonry.
• PadstonesConcrete pads that spread the load at the ends of beams and lintels.

Planning the drop in Ipswich

Lintels are long, so tell us about tight access. Shorter lintels can travel with a mixed load; long steel lintels are handled by hand or crane. Ipswich is inside our standard mainland delivery area.

• On busy streets in Ipswich, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• In summer Ipswich gets around 16h 45m of daylight, but early deliveries still beat the traffic and give the longest working day.
• Give us the full postcode for the drop point; deliveries around IP1 are priced to the exact address.

Getting the right lintels

Do I need a cavity tray?

Over openings in cavity walls, water in the cavity has to be directed outwards. Many steel lintels need a separate cavity tray and stop ends; check the lintel maker's detail.

Which lintel for my opening?

Measure the clear opening, add the end bearing each side, and note the wall type (cavity width, inner and outer leaf) and what sits above. Manufacturers publish load tables; for anything carrying a floor, roof or point load get an engineer or building control to confirm.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

How much will you need?

For a 2,400 mm clear opening, add at least 150 mm of bearing at each end: the lintel needs to be at least 2,700 mm long. Then pick the type for the wall build-up and check the load in the manufacturer's table, or ask your engineer if the opening carries a floor or roof.

Steel & Concrete Lintels in Ipswich: questions

How long should a lintel be?

The clear opening plus the end bearing at each side, typically at least 150 mm per end. Check the manufacturer's table for your lintel.

Do you deliver lintels to Ipswich?

Yes. We deliver across Ipswich, including IP1, IP4, IP2, IP3. Ipswich is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Are steel lintels insulated?

Cavity wall steel lintels usually have insulation inside to cut heat loss at the opening. Single-leaf and box lintels may not.

Can you deliver lintels to a site with restricted access in Ipswich?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.