Steel & Concrete Lintels delivered to Ellesmere Port

Steel & Concrete Lintels we supply in Ellesmere Port

• Steel cavity wall lintelsInsulated galvanised lintels that support both leaves of a cavity wall.
• Single-leaf and box lintelsFor solid walls, timber frame and internal walls.
• Cavity trays and stop endsTo shed water out of the cavity over openings.
• PadstonesConcrete pads that spread the load at the ends of beams and lintels.
• Heavy-duty and extra-heavy lintelsFor openings carrying floors or a lot of masonry.

Working out quantities for your Ellesmere Port job

For a 2,100 mm clear opening, add at least 150 mm of bearing at each end: the lintel needs to be at least 2,400 mm long. Then pick the type for the wall build-up and check the load in the manufacturer's table, or ask your engineer if the opening carries a floor or roof.

Planning the drop in Ellesmere Port

Lintels are long, so tell us about tight access. Shorter lintels can travel with a mixed load; long steel lintels are handled by hand or crane. Ellesmere Port is inside our standard mainland delivery area.

• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.

Choosing lintels

Which lintel for my opening?

Measure the clear opening, add the end bearing each side, and note the wall type (cavity width, inner and outer leaf) and what sits above. Manufacturers publish load tables; for anything carrying a floor, roof or point load get an engineer or building control to confirm.

Steel or concrete?

Steel cavity lintels support both leaves and include insulation to limit cold bridging. Concrete lintels are simple and robust for single leaves and internal walls.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Ordering lintels for Ellesmere Port: FAQs

Can lintels be delivered with my blocks?

Yes. We combine them on one lorry where the lengths and the route allow.

Do I need building control approval for a new lintel?

Making or widening an opening in a loadbearing wall is structural work, so in most cases yes. Building control or an engineer will confirm the lintel.

Can I add other materials to my Ellesmere Port delivery?

Yes. Put everything on one list, from lintels to fixings and PPE, and we will price it as one delivery where the products can travel together.

Can you deliver lintels to a site with restricted access in Ellesmere Port?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.