Steel & Concrete Lintels for Denton, delivered to site

Choosing from our lintels range

• Steel cavity wall lintelsInsulated galvanised lintels that support both leaves of a cavity wall.
• Single-leaf and box lintelsFor solid walls, timber frame and internal walls.
• Cavity trays and stop endsTo shed water out of the cavity over openings.
• PadstonesConcrete pads that spread the load at the ends of beams and lintels.

Steel & Concrete Lintels: choosing well

Which lintel for my opening?

Measure the clear opening, add the end bearing each side, and note the wall type (cavity width, inner and outer leaf) and what sits above. Manufacturers publish load tables; for anything carrying a floor, roof or point load get an engineer or building control to confirm.

Do I need a cavity tray?

Over openings in cavity walls, water in the cavity has to be directed outwards. Many steel lintels need a separate cavity tray and stop ends; check the lintel maker's detail.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Getting lintels onto your Denton site

Lintels are long, so tell us about tight access. Shorter lintels can travel with a mixed load; long steel lintels are handled by hand or crane. Denton is inside our standard mainland delivery area.

• On busy streets in Denton, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.

Sizing your order

For a 1,800 mm clear opening, add at least 150 mm of bearing at each end: the lintel needs to be at least 2,100 mm long. Then pick the type for the wall build-up and check the load in the manufacturer's table, or ask your engineer if the opening carries a floor or roof.

Steel & Concrete Lintels questions

How long should a lintel be?

The clear opening plus the end bearing at each side, typically at least 150 mm per end. Check the manufacturer's table for your lintel.

What is a padstone for?

It spreads a concentrated load, such as the end of a beam, over a larger area of masonry so the blocks or bricks underneath are not crushed.

Is there a minimum order for delivery to Denton?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can I add other materials to my Denton delivery?

Yes. Put everything on one list, from lintels to fixings and PPE, and we will price it as one delivery where the products can travel together.