Steel & Concrete Lintels delivered to Corby

Our lintels range for Corby jobs

• PadstonesConcrete pads that spread the load at the ends of beams and lintels.
• Steel cavity wall lintelsInsulated galvanised lintels that support both leaves of a cavity wall.
• Prestressed concrete lintelsPlain concrete lintels for inner leaves and internal openings.
• Cavity trays and stop endsTo shed water out of the cavity over openings.

Estimating your lintels

For a 2,400 mm clear opening, add at least 150 mm of bearing at each end: the lintel needs to be at least 2,700 mm long. Then pick the type for the wall build-up and check the load in the manufacturer's table, or ask your engineer if the opening carries a floor or roof.

Choosing lintels

Which lintel for my opening?

Measure the clear opening, add the end bearing each side, and note the wall type (cavity width, inner and outer leaf) and what sits above. Manufacturers publish load tables; for anything carrying a floor, roof or point load get an engineer or building control to confirm.

Steel or concrete?

Steel cavity lintels support both leaves and include insulation to limit cold bridging. Concrete lintels are simple and robust for single leaves and internal walls.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Before your Corby delivery arrives

Lintels are long, so tell us about tight access. Shorter lintels can travel with a mixed load; long steel lintels are handled by hand or crane. Corby is inside our standard mainland delivery area.

• On busy streets in Corby, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• With roughly 7h 39m of daylight in Corby around the shortest day, morning deliveries leave more working light for the job.

Steel & Concrete Lintels questions

Can I add other materials to my Corby delivery?

Yes. Put everything on one list, from lintels to fixings and PPE, and we will price it as one delivery where the products can travel together.

How long should a lintel be?

The clear opening plus the end bearing at each side, typically at least 150 mm per end. Check the manufacturer's table for your lintel.

Can you tell me which lintel to use?

We can suggest options from the manufacturers' load tables based on the opening, wall type and load you describe, but for anything structural the final choice should come from your designer or engineer, and be approved through building control.

Can you deliver lintels to a site with restricted access in Corby?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.