Underground Drainage delivery in Hampton

Our drainage range for Hampton jobs

• 110 mm and 160 mm pipePVC-U underground pipe in 3 m and 6 m lengths.
• Rainwater systemsGutters, downpipes and fittings.
• Soakaway cratesFor surface water where ground conditions allow.
• Gullies and channel drainsTo collect surface water from yards and drives.
• Inspection chambers and coversPlastic chambers with covers rated for the location.

Choosing drainage

Foul or surface water?

Foul (sewage) and surface water often need to go to different places. Check where your drains connect before you order.

Covers for the location

Chamber covers are rated for loads, from pedestrian areas to drives. Tell us where each chamber sits.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Sizing your order

An 8 m run of 110 mm drain needs 3 pipes in 3 m lengths (or 2 in 6 m lengths), plus a bend or junction at each change of direction and an inspection chamber where your design shows one. Add pea gravel for bedding and surround and we will price the lot together.

How delivery works in Hampton

Pipe travels in 3 m and 6 m lengths; fittings and chambers come boxed or loose with the load. Hampton is inside our standard mainland delivery area.

• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.

Ordering drainage for Hampton: FAQs

Can you deliver drainage to a site with restricted access in Hampton?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Is there a minimum order for delivery to Hampton?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

What size drainage pipe do I need?

110 mm is the standard size for most domestic underground foul and surface water drains; 160 mm is used for larger runs. Your design or building control will confirm.

What do I bed drainage pipe in?

Usually pea gravel or a similar granular material around the pipe. We can add it to the order as bulk bags.