Building Materials
Damp Proofing & Membranes delivered to Reigate
Damp proofing materials stop moisture rising or passing through a building: a damp-proof course (DPC) in the walls and a damp-proof membrane (DPM) under the floor.
Building in Reigate? Send us your list and we will come back with a delivered price for the damp proofing and anything else on it.

Reigate delivery at a glance
- Nearby (straight line)
- Redhill (2 mi), Horley (5 mi), Banstead (6 mi)
- How it arrives
- Rolls with a mixed load
- Daylight
- About 7h 52m on the shortest day
- Delivery
- Standard mainland delivery
- Postcode districts
- RH2, RH1, RH3
- Delivering to
- Reigate, Surrey
Which damp proofing can you order in Reigate?
- DPC rollsPolymer and bitumen damp-proof course in standard wall widths.
- Liquid DPM and tankingCoatings for screeds and below-ground walls.
- Weep ventsFor drainage and ventilation at the base of cavities and over trays.
- DPM sheetingHeavy-gauge polythene membrane under concrete floors.
- Cavity trays and stop endsTo direct water out of the cavity over openings.
Getting the right damp proofing
Laps and joints
DPM and DPC need generous laps and sealed joints; follow the manufacturer's guidance.
DPC width
Match the DPC width to the wall leaf so it runs the full width of the masonry.
In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.
How much will you need?
An extension in Reigate with 16 m of cavity wall needs DPC in both leaves: about 2 rolls in 30 m lengths once laps are allowed for. A 20 m² floor slab needs about 23 m² of DPM including laps, which is 1 roll of 4 × 25 m sheeting.
Getting damp proofing onto your Reigate site
Rolls are light enough to travel with a mixed load and are handed off at the kerb. Reigate is inside our standard mainland delivery area.
- Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
- If the site is up a shared drive or behind other houses, tell us the distance from the road.
- Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
Damp Proofing & Membranes in Reigate: questions
How thick should a DPM be?
1200-gauge polythene, around 300 microns, is a common specification for floor slabs. Your design may call for something different.
Do I need a radon barrier?
It depends on where you are. In radon-affected areas building control requires radon protection in new buildings and extensions.
Can you deliver damp proofing to a site with restricted access in Reigate?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
How soon can damp proofing be delivered in Reigate?
We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.
Nearby towns we deliver damp proofing to
- Damp Proofing & Membranes in Redhill
- Damp Proofing & Membranes in Horley
- Damp Proofing & Membranes in Banstead
- Damp Proofing & Membranes in Caterham
- Damp Proofing & Membranes in Coulsdon
- Damp Proofing & Membranes in Leatherhead
Also available in Reigate
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
