Damp Proofing & Membranes for Pudsey, delivered to site

Choosing from our damp proofing range

• DPC rollsPolymer and bitumen damp-proof course in standard wall widths.
• Weep ventsFor drainage and ventilation at the base of cavities and over trays.
• Cavity trays and stop endsTo direct water out of the cavity over openings.
• DPM sheetingHeavy-gauge polythene membrane under concrete floors.

Delivery to Pudsey: what helps

Rolls are light enough to travel with a mixed load and are handed off at the kerb. Pudsey is inside our standard mainland delivery area.

• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.

Choosing damp proofing

Laps and joints

DPM and DPC need generous laps and sealed joints; follow the manufacturer's guidance.

Is radon protection needed?

Parts of the UK need radon protection in new buildings and extensions. UKHSA radon maps show the areas; building control will tell you what applies.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Estimating your damp proofing

An extension in Pudsey with 12 m of cavity wall needs DPC in both leaves: about 1 roll in 30 m lengths once laps are allowed for. A 50 m² floor slab needs about 57.5 m² of DPM including laps, which is 1 roll of 4 × 25 m sheeting.

Damp Proofing & Membranes in Pudsey: questions

Can I add other materials to my Pudsey delivery?

Yes. Put everything on one list, from damp proofing to fixings and PPE, and we will price it as one delivery where the products can travel together.

Is there a minimum order for delivery to Pudsey?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How thick should a DPM be?

1200-gauge polythene, around 300 microns, is a common specification for floor slabs. Your design may call for something different.

Do I need a radon barrier?

It depends on where you are. In radon-affected areas building control requires radon protection in new buildings and extensions.