Damp Proofing & Membranes delivery in Norfolk

Damp Proofing & Membranes available for Norfolk delivery

• Cavity trays and stop endsTo direct water out of the cavity over openings.
• Liquid DPM and tankingCoatings for screeds and below-ground walls.
• Weep ventsFor drainage and ventilation at the base of cavities and over trays.
• Radon barriersGas-resistant membranes for areas that need radon protection.
• DPM sheetingHeavy-gauge polythene membrane under concrete floors.

Damp Proofing & Membranes delivered in Norfolk towns

• Damp Proofing & Membranes in Norwich
• Damp Proofing & Membranes in Great Yarmouth
• Damp Proofing & Membranes in King's Lynn
• Damp Proofing & Membranes in Thetford

Estimating your damp proofing

An extension in Norfolk with 24 m of cavity wall needs DPC in both leaves: about 2 rolls in 30 m lengths once laps are allowed for. A 50 m² floor slab needs about 57.5 m² of DPM including laps, which is 1 roll of 4 × 25 m sheeting.

Before your Norfolk delivery arrives

Rolls are light enough to travel with a mixed load and are handed off at the kerb. Our standard mainland delivery area covers Norfolk.

• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.

Damp Proofing & Membranes: choosing well

DPC width

Match the DPC width to the wall leaf so it runs the full width of the masonry.

Is radon protection needed?

Parts of the UK need radon protection in new buildings and extensions. UKHSA radon maps show the areas; building control will tell you what applies.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Questions about damp proofing delivery in Norfolk

How thick should a DPM be?

1200-gauge polythene, around 300 microns, is a common specification for floor slabs. Your design may call for something different.

Is there a minimum order for delivery to Norfolk?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Do you supply cavity trays?

Yes, with stop ends and weep vents for openings and abutments.

Do you deliver damp proofing to Norfolk?

Yes. We deliver across Norfolk, including NR, PE, IP. Our standard mainland delivery area covers Norfolk. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.