Building Materials
Damp Proofing & Membranes delivery in Maesteg
Damp proofing materials stop moisture rising or passing through a building: a damp-proof course (DPC) in the walls and a damp-proof membrane (DPM) under the floor.
Order damp proofing for Maesteg with one message: we check the quantities, price the delivery and confirm everything before you pay.

Delivery facts for Maesteg
- Daylight
- About 7h 48m on the shortest day
- How it arrives
- Rolls with a mixed load
- Nearby (straight line)
- Briton Ferry (7 mi), Neath (7 mi), Bridgend (8 mi)
- Delivery
- Standard mainland delivery
- Delivering to
- Maesteg, Mid Glamorgan
- Postcode districts
- CF34
Choosing from our damp proofing range
- DPC rollsPolymer and bitumen damp-proof course in standard wall widths.
- Liquid DPM and tankingCoatings for screeds and below-ground walls.
- DPM sheetingHeavy-gauge polythene membrane under concrete floors.
- Cavity trays and stop endsTo direct water out of the cavity over openings.
- Radon barriersGas-resistant membranes for areas that need radon protection.
Quantities: a worked example
An extension in Maesteg with 20 m of cavity wall needs DPC in both leaves: about 2 rolls in 30 m lengths once laps are allowed for. A 50 m² floor slab needs about 57.5 m² of DPM including laps, which is 1 roll of 4 × 25 m sheeting.
How delivery works in Maesteg
Rolls are light enough to travel with a mixed load and are handed off at the kerb. Maesteg is inside our standard mainland delivery area.
- If the site is up a shared drive or behind other houses, tell us the distance from the road.
- Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
- Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
Before you order damp proofing
DPC width
Match the DPC width to the wall leaf so it runs the full width of the masonry.
Laps and joints
DPM and DPC need generous laps and sealed joints; follow the manufacturer's guidance.
Wales has its own Approved Documents, including its own Part L for energy efficiency, and building control is handled by the local authority or a registered approver.
Damp Proofing & Membranes questions
How thick should a DPM be?
1200-gauge polythene, around 300 microns, is a common specification for floor slabs. Your design may call for something different.
What is the difference between DPC and DPM?
DPC is a strip built into walls to stop damp rising through the masonry. DPM is a sheet laid under a concrete floor slab. They are lapped together so there is no gap.
Can you deliver damp proofing to a site with restricted access in Maesteg?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Do you deliver damp proofing to trades and homeowners in Maesteg?
Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.
Close to Maesteg
- Damp Proofing & Membranes in Briton Ferry
- Damp Proofing & Membranes in Neath
- Damp Proofing & Membranes in Bridgend
- Damp Proofing & Membranes in Tonypandy
- Damp Proofing & Membranes in Rhondda
- Damp Proofing & Membranes in Aberdare
Complete your Maesteg order
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
