Order damp proofing for delivery in Kenilworth

Damp Proofing & Membranes available for Kenilworth delivery

• Liquid DPM and tankingCoatings for screeds and below-ground walls.
• DPC rollsPolymer and bitumen damp-proof course in standard wall widths.
• Weep ventsFor drainage and ventilation at the base of cavities and over trays.
• Radon barriersGas-resistant membranes for areas that need radon protection.

Delivery to Kenilworth: what helps

Rolls are light enough to travel with a mixed load and are handed off at the kerb. Kenilworth is inside our standard mainland delivery area.

• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• If the site is up a shared drive or behind other houses, tell us the distance from the road.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.

How much will you need?

An extension in Kenilworth with 36 m of cavity wall needs DPC in both leaves: about 3 rolls in 30 m lengths once laps are allowed for. A 40 m² floor slab needs about 46 m² of DPM including laps, which is 1 roll of 4 × 25 m sheeting.

Choosing damp proofing

DPC width

Match the DPC width to the wall leaf so it runs the full width of the masonry.

Is radon protection needed?

Parts of the UK need radon protection in new buildings and extensions. UKHSA radon maps show the areas; building control will tell you what applies.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Ordering damp proofing for Kenilworth: FAQs

Can you deliver damp proofing to a site with restricted access in Kenilworth?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Can I add other materials to my Kenilworth delivery?

Yes. Put everything on one list, from damp proofing to fixings and PPE, and we will price it as one delivery where the products can travel together.

How thick should a DPM be?

1200-gauge polythene, around 300 microns, is a common specification for floor slabs. Your design may call for something different.

Do you supply cavity trays?

Yes, with stop ends and weep vents for openings and abutments.