Damp Proofing & Membranes for Edmonton, delivered to site

Our damp proofing range for Edmonton jobs

• Cavity trays and stop endsTo direct water out of the cavity over openings.
• Weep ventsFor drainage and ventilation at the base of cavities and over trays.
• DPC rollsPolymer and bitumen damp-proof course in standard wall widths.
• DPM sheetingHeavy-gauge polythene membrane under concrete floors.

Sizing your order

An extension in Edmonton with 16 m of cavity wall needs DPC in both leaves: about 2 rolls in 30 m lengths once laps are allowed for. A 30 m² floor slab needs about 34.5 m² of DPM including laps, which is 1 roll of 4 × 25 m sheeting.

Picking the right product

Laps and joints

DPM and DPC need generous laps and sealed joints; follow the manufacturer's guidance.

DPC width

Match the DPC width to the wall leaf so it runs the full width of the masonry.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

How delivery works in Edmonton

Rolls are light enough to travel with a mixed load and are handed off at the kerb. Edmonton is inside our standard mainland delivery area.

• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
• In summer Edmonton gets around 16h 40m of daylight, but early deliveries still beat the traffic and give the longest working day.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.

Your questions answered

Is there a minimum order for delivery to Edmonton?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How soon can damp proofing be delivered in Edmonton?

We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.

Do you supply cavity trays?

Yes, with stop ends and weep vents for openings and abutments.

How thick should a DPM be?

1200-gauge polythene, around 300 microns, is a common specification for floor slabs. Your design may call for something different.