Damp Proofing & Membranes for Eastbourne, delivered to site

Choosing from our damp proofing range

• Weep ventsFor drainage and ventilation at the base of cavities and over trays.
• Liquid DPM and tankingCoatings for screeds and below-ground walls.
• DPC rollsPolymer and bitumen damp-proof course in standard wall widths.
• Radon barriersGas-resistant membranes for areas that need radon protection.

A quick quantity check

An extension in Eastbourne with 36 m of cavity wall needs DPC in both leaves: about 3 rolls in 30 m lengths once laps are allowed for. A 20 m² floor slab needs about 23 m² of DPM including laps, which is 1 roll of 4 × 25 m sheeting.

Before your Eastbourne delivery arrives

Rolls are light enough to travel with a mixed load and are handed off at the kerb. Eastbourne is inside our standard mainland delivery area.

• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.

Damp Proofing & Membranes: choosing well

Laps and joints

DPM and DPC need generous laps and sealed joints; follow the manufacturer's guidance.

Is radon protection needed?

Parts of the UK need radon protection in new buildings and extensions. UKHSA radon maps show the areas; building control will tell you what applies.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Common questions from Eastbourne

Can I add other materials to my Eastbourne delivery?

Yes. Put everything on one list, from damp proofing to fixings and PPE, and we will price it as one delivery where the products can travel together.

Do you supply cavity trays?

Yes, with stop ends and weep vents for openings and abutments.

How thick should a DPM be?

1200-gauge polythene, around 300 microns, is a common specification for floor slabs. Your design may call for something different.

Do you deliver damp proofing to trades and homeowners in Eastbourne?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.