Damp Proofing & Membranes delivery in Burnham-on-Sea

Damp Proofing & Membranes available for Burnham-on-Sea delivery

• Weep ventsFor drainage and ventilation at the base of cavities and over trays.
• Liquid DPM and tankingCoatings for screeds and below-ground walls.
• Radon barriersGas-resistant membranes for areas that need radon protection.
• Cavity trays and stop endsTo direct water out of the cavity over openings.
• DPM sheetingHeavy-gauge polythene membrane under concrete floors.

How much will you need?

An extension in Burnham-on-Sea with 32 m of cavity wall needs DPC in both leaves: about 3 rolls in 30 m lengths once laps are allowed for. A 25 m² floor slab needs about 28.7 m² of DPM including laps, which is 1 roll of 4 × 25 m sheeting.

Getting the right damp proofing

Laps and joints

DPM and DPC need generous laps and sealed joints; follow the manufacturer's guidance.

DPC width

Match the DPC width to the wall leaf so it runs the full width of the masonry.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Planning the drop in Burnham-on-Sea

Rolls are light enough to travel with a mixed load and are handed off at the kerb. Burnham-on-Sea is inside our standard mainland delivery area.

• With roughly 7h 52m of daylight in Burnham-on-Sea around the shortest day, morning deliveries leave more working light for the job.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.

Ordering damp proofing for Burnham-on-Sea: FAQs

Do you deliver damp proofing to Burnham-on-Sea?

Yes. We deliver across Burnham-on-Sea, including TA8, TA9, TA5. Burnham-on-Sea is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

How thick should a DPM be?

1200-gauge polythene, around 300 microns, is a common specification for floor slabs. Your design may call for something different.

Is there a minimum order for delivery to Burnham-on-Sea?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Do you supply cavity trays?

Yes, with stop ends and weep vents for openings and abutments.