Damp Proofing & Membranes delivery in Berkshire

Choosing from our damp proofing range

• Liquid DPM and tankingCoatings for screeds and below-ground walls.
• Weep ventsFor drainage and ventilation at the base of cavities and over trays.
• DPM sheetingHeavy-gauge polythene membrane under concrete floors.
• Radon barriersGas-resistant membranes for areas that need radon protection.
• Cavity trays and stop endsTo direct water out of the cavity over openings.

Damp Proofing & Membranes delivered in Berkshire towns

• Damp Proofing & Membranes in Reading
• Damp Proofing & Membranes in Slough
• Damp Proofing & Membranes in Bracknell
• Damp Proofing & Membranes in Maidenhead
• Damp Proofing & Membranes in Wokingham
• Damp Proofing & Membranes in Newbury
• Damp Proofing & Membranes in Windsor
• Damp Proofing & Membranes in Crowthorne
• Damp Proofing & Membranes in Thatcham
• Damp Proofing & Membranes in Sandhurst

Working out quantities for your Berkshire job

An extension in Berkshire with 28 m of cavity wall needs DPC in both leaves: about 3 rolls in 30 m lengths once laps are allowed for. A 30 m² floor slab needs about 34.5 m² of DPM including laps, which is 1 roll of 4 × 25 m sheeting.

Delivery to Berkshire: what helps

Rolls are light enough to travel with a mixed load and are handed off at the kerb. Our standard mainland delivery area covers Berkshire.

• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• On busy streets in Berkshire, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.

Choosing damp proofing

Laps and joints

DPM and DPC need generous laps and sealed joints; follow the manufacturer's guidance.

Is radon protection needed?

Parts of the UK need radon protection in new buildings and extensions. UKHSA radon maps show the areas; building control will tell you what applies.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Your questions answered

How thick should a DPM be?

1200-gauge polythene, around 300 microns, is a common specification for floor slabs. Your design may call for something different.

Is there a minimum order for delivery to Berkshire?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Do you supply cavity trays?

Yes, with stop ends and weep vents for openings and abutments.

Do you deliver damp proofing to Berkshire?

Yes. We deliver across Berkshire, including RG, SL, GU. Our standard mainland delivery area covers Berkshire. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.