Building Materials
Damp Proofing & Membranes for Barnet, delivered to site
Damp proofing materials stop moisture rising or passing through a building: a damp-proof course (DPC) in the walls and a damp-proof membrane (DPM) under the floor.
From EN5 to EN4, we price damp proofing delivered to Barnet and confirm the drop point and date when you order.

Damp Proofing & Membranes to Barnet: the basics
- Delivery
- Standard mainland delivery
- How it arrives
- Rolls with a mixed load
- Postcode districts
- EN5, N20, EN4
- Delivering to
- Barnet, Greater London
- Nearby (straight line)
- Potters Bar (3 mi), Borehamwood (3 mi), Finchley (3 mi)
- Daylight
- About 7h 48m on the shortest day
Damp Proofing & Membranes available for Barnet delivery
- Cavity trays and stop endsTo direct water out of the cavity over openings.
- Liquid DPM and tankingCoatings for screeds and below-ground walls.
- DPC rollsPolymer and bitumen damp-proof course in standard wall widths.
- Weep ventsFor drainage and ventilation at the base of cavities and over trays.
Getting damp proofing onto your Barnet site
Rolls are light enough to travel with a mixed load and are handed off at the kerb. Barnet is inside our standard mainland delivery area.
- Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
- Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
- Give us the full postcode for the drop point; deliveries around EN5 are priced to the exact address.
Picking the right product
DPC width
Match the DPC width to the wall leaf so it runs the full width of the masonry.
Laps and joints
DPM and DPC need generous laps and sealed joints; follow the manufacturer's guidance.
In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.
Estimating your damp proofing
An extension in Barnet with 16 m of cavity wall needs DPC in both leaves: about 2 rolls in 30 m lengths once laps are allowed for. A 50 m² floor slab needs about 57.5 m² of DPM including laps, which is 1 roll of 4 × 25 m sheeting.
Damp Proofing & Membranes in Barnet: questions
Is there a minimum order for delivery to Barnet?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
How thick should a DPM be?
1200-gauge polythene, around 300 microns, is a common specification for floor slabs. Your design may call for something different.
Do I need a radon barrier?
It depends on where you are. In radon-affected areas building control requires radon protection in new buildings and extensions.
Can I add other materials to my Barnet delivery?
Yes. Put everything on one list, from damp proofing to fixings and PPE, and we will price it as one delivery where the products can travel together.
Also delivering damp proofing nearby
- Damp Proofing & Membranes in Potters Bar
- Damp Proofing & Membranes in Borehamwood
- Damp Proofing & Membranes in Finchley
- Damp Proofing & Membranes in Muswell Hill
- Damp Proofing & Membranes in Enfield
- Damp Proofing & Membranes in Wood Green
Also available in Barnet
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
