Building Materials
Order damp proofing for delivery in Aberdeen
Damp proofing materials stop moisture rising or passing through a building: a damp-proof course (DPC) in the walls and a damp-proof membrane (DPM) under the floor.
We deliver damp proofing to sites, driveways and yards across Aberdeen, from a single pallet for a small job to full loads for bigger builds.

Aberdeen delivery at a glance
- Delivering to
- Aberdeen (Aberdeen and Aberdeenshire)
- Daylight
- About 6h 40m on the shortest day
- Nearby (straight line)
- Westhill (7 mi), Stonehaven (13 mi), Inverurie (14 mi)
- Postcode districts
- AB10, AB11, AB12, AB24
- How it arrives
- Rolls with a mixed load
- Delivery
- Standard mainland delivery
Our damp proofing range for Aberdeen jobs
- Liquid DPM and tankingCoatings for screeds and below-ground walls.
- Cavity trays and stop endsTo direct water out of the cavity over openings.
- DPC rollsPolymer and bitumen damp-proof course in standard wall widths.
- Weep ventsFor drainage and ventilation at the base of cavities and over trays.
- Radon barriersGas-resistant membranes for areas that need radon protection.
Delivering damp proofing in Aberdeen
Rolls are light enough to travel with a mixed load and are handed off at the kerb. Aberdeen is inside our standard mainland delivery area.
- With roughly 6h 40m of daylight in Aberdeen around the shortest day, morning deliveries leave more working light for the job.
- If the site is up a shared drive or behind other houses, tell us the distance from the road.
- Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
A quick quantity check
An extension in Aberdeen with 32 m of cavity wall needs DPC in both leaves: about 3 rolls in 30 m lengths once laps are allowed for. A 15 m² floor slab needs about 17.2 m² of DPM including laps, which is 1 roll of 4 × 25 m sheeting.
Things to check before you order
DPC width
Match the DPC width to the wall leaf so it runs the full width of the masonry.
Laps and joints
DPM and DPC need generous laps and sealed joints; follow the manufacturer's guidance.
In Scotland most building work needs a building warrant from the local authority, assessed against the Building Standards Technical Handbooks.
Questions about damp proofing delivery in Aberdeen
How thick should a DPM be?
1200-gauge polythene, around 300 microns, is a common specification for floor slabs. Your design may call for something different.
Do I need a radon barrier?
It depends on where you are. In radon-affected areas building standards require radon protection in new buildings and extensions.
Do you deliver damp proofing to trades and homeowners in Aberdeen?
Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.
Is there a minimum order for delivery to Aberdeen?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
Damp Proofing & Membranes near Aberdeen
- Damp Proofing & Membranes in Westhill
- Damp Proofing & Membranes in Stonehaven
- Damp Proofing & Membranes in Inverurie
- Damp Proofing & Membranes in Peterhead
- Damp Proofing & Membranes in Montrose
- Damp Proofing & Membranes in Fraserburgh
Complete your Aberdeen order
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
