Concrete & Aircrete Blocks for Wilmslow, delivered to site

Concrete & Aircrete Blocks available for Wilmslow delivery

• Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
• Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.
• Block paving and edgingsOn request alongside your sub-base and sand.
• Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.
• Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.

How delivery works in Wilmslow

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Wilmslow is inside our standard mainland delivery area.

• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.

How much will you need?

A single-skin block wall in Wilmslow 10 m long and 2.4 m high is 24 m². At 10 blocks per square metre plus 5% you need 252 blocks, with about 0.35 tonnes of building sand and 4 bags of cement for the mortar at 1:4. Try the block calculator

Before you order concrete blocks

Dense or aircrete?

Dense blocks are strong and good for sound separation but heavy; a 100 mm dense block can weigh around 20 kg. Aircrete blocks are much lighter and insulate better, which helps with energy targets, but need the right fixings.

Handling heavy blocks

Health and safety guidance discourages laying very heavy blocks by hand for long periods. Lighter blocks or planning the lift can make a big difference on site.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Your questions answered

What is the difference between 3.6 and 7.3 N/mm² blocks?

The number is the compressive strength. 7.3 N/mm² blocks carry more load and are often specified below ground or for heavily loaded walls; 3.6 N/mm² is common for upper storeys and partitions. Follow your drawings.

Do you deliver concrete blocks to trades and homeowners in Wilmslow?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

How many blocks per square metre?

Standard 440 × 215 mm blocks with 10 mm joints lay at about 10 blocks per square metre of wall. Add around 5 percent for cuts.

Do you deliver concrete blocks to Wilmslow?

Yes. We deliver across Wilmslow, including SK9, SK10, WA16. Wilmslow is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.