Concrete & Aircrete Blocks delivered to Swinton

Concrete & Aircrete Blocks we supply in Swinton

• Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.
• Block paving and edgingsOn request alongside your sub-base and sand.
• Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.
• Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
• Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.

Choosing concrete blocks

Handling heavy blocks

Health and safety guidance discourages laying very heavy blocks by hand for long periods. Lighter blocks or planning the lift can make a big difference on site.

Dense or aircrete?

Dense blocks are strong and good for sound separation but heavy; a 100 mm dense block can weigh around 20 kg. Aircrete blocks are much lighter and insulate better, which helps with energy targets, but need the right fixings.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

A quick quantity check

A single-skin block wall in Swinton 4 m long and 2.4 m high is 9.6 m². At 10 blocks per square metre plus 5% you need 101 blocks, with about 0.14 tonnes of building sand and 2 bags of cement for the mortar at 1:4. Try the block calculator

Planning the drop in Swinton

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Swinton is inside our standard mainland delivery area.

• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
• Give us the full postcode for the drop point; deliveries around M27 are priced to the exact address.

Questions about concrete blocks delivery in Swinton

How much mortar for blockwork?

Roughly 0.008 to 0.01 cubic metres of mortar per square metre of 100 mm blockwork, allowing for waste. Use our block calculator for sand and cement quantities.

Can you deliver concrete blocks to a site with restricted access in Swinton?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How heavy is a concrete block?

It depends on the type and thickness. A 100 mm dense block is roughly 18 to 20 kg, a lightweight block noticeably less, and an aircrete block much less again.

Do you deliver concrete blocks to trades and homeowners in Swinton?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.