Concrete & Aircrete Blocks delivery in Oadby

Concrete & Aircrete Blocks available for Oadby delivery

• Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.
• Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.
• Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.
• Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.

Concrete & Aircrete Blocks: choosing well

Handling heavy blocks

Health and safety guidance discourages laying very heavy blocks by hand for long periods. Lighter blocks or planning the lift can make a big difference on site.

What strength do I need?

Most houses use 3.6 N/mm² or 7.3 N/mm² blocks. Your structural design, your building control officer or the block manufacturer's guidance sets the grade; tell us what is specified and we will match it.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

How delivery works in Oadby

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Oadby is inside our standard mainland delivery area.

• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.

How much will you need?

A single-skin block wall in Oadby 5 m long and 2.4 m high is 12 m². At 10 blocks per square metre plus 5% you need 126 blocks, with about 0.17 tonnes of building sand and 2 bags of cement for the mortar at 1:4. Try the block calculator

Common questions from Oadby

Can I use blocks in the foundations?

Yes, using blocks made for below ground, often trench blocks or dense blocks of the specified strength. Building control will check foundation design.

Do you deliver concrete blocks to trades and homeowners in Oadby?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Do you deliver concrete blocks to Oadby?

Yes. We deliver across Oadby, including LE2, LE18, LE7. Oadby is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

What is the difference between 3.6 and 7.3 N/mm² blocks?

The number is the compressive strength. 7.3 N/mm² blocks carry more load and are often specified below ground or for heavily loaded walls; 3.6 N/mm² is common for upper storeys and partitions. Follow your drawings.