SK Trade, sktrade.co.uk

Building Materials

Concrete & Aircrete Blocks for Newark-on-Trent, delivered to site

Concrete blocks are large masonry units, normally 440 × 215 mm on face, that lay at about 10 blocks per square metre; they come as dense aggregate, lightweight aggregate or aircrete (aerated) blocks.

SK Trade is a builders' merchant delivering concrete blocks into Newark-on-Trent, priced to your postcode and confirmed in writing.

Pallets of grey dense concrete blocks and pale aircrete blocks beside a blockwork wall

Newark-on-Trent delivery at a glance

Daylight
About 7h 33m on the shortest day
Nearby (straight line)
Grantham (13 mi), Arnold (14 mi), Nottingham (16 mi)
Delivery
Standard mainland delivery
Delivering to
Newark-on-Trent, Nottinghamshire
How it arrives
Banded pallets, usually crane offload
Postcode districts
NG24, NG23

Concrete & Aircrete Blocks available for Newark-on-Trent delivery

  • Block paving and edgingsOn request alongside your sub-base and sand.
  • Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.
  • Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
  • Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.
  • Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.

Choosing concrete blocks

Thickness

100 mm is the common inner-leaf thickness. Wider blocks (140, 190, 215 mm) are used for separating walls, single-skin garage walls and foundations.

Dense or aircrete?

Dense blocks are strong and good for sound separation but heavy; a 100 mm dense block can weigh around 20 kg. Aircrete blocks are much lighter and insulate better, which helps with energy targets, but need the right fixings.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Working out quantities for your Newark-on-Trent job

A single-skin block wall in Newark-on-Trent 8 m long and 2.1 m high is 16.8 m². At 10 blocks per square metre plus 5% you need 177 blocks, with about 0.24 tonnes of building sand and 3 bags of cement for the mortar at 1:4. Try the block calculator

Delivering concrete blocks in Newark-on-Trent

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Newark-on-Trent is inside our standard mainland delivery area.

  • Give us the full postcode for the drop point; deliveries around NG24 are priced to the exact address.
  • If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
  • On busy streets in Newark-on-Trent, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.

Questions about concrete blocks delivery in Newark-on-Trent

How many blocks per square metre?

Standard 440 × 215 mm blocks with 10 mm joints lay at about 10 blocks per square metre of wall. Add around 5 percent for cuts.

Do you deliver concrete blocks to trades and homeowners in Newark-on-Trent?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Can I use blocks in the foundations?

Yes, using blocks made for below ground, often trench blocks or dense blocks of the specified strength. Building control will check foundation design.

Is there a minimum order for delivery to Newark-on-Trent?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price