Concrete & Aircrete Blocks delivered to Lisnaskea

Concrete & Aircrete Blocks available for Lisnaskea delivery

• Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.
• Block paving and edgingsOn request alongside your sub-base and sand.
• Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.
• Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.

Delivering concrete blocks in Lisnaskea

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Deliveries to Northern Ireland include a sea crossing, so we quote each order individually.

• Give us the full postcode for the drop point; deliveries around BT92 are priced to the exact address.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• With roughly 7h 19m of daylight in Lisnaskea around the shortest day, morning deliveries leave more working light for the job.

Things to check before you order

Thickness

100 mm is the common inner-leaf thickness. Wider blocks (140, 190, 215 mm) are used for separating walls, single-skin garage walls and foundations.

What strength do I need?

Most houses use 3.6 N/mm² or 7.3 N/mm² blocks. Your structural design, your building control officer or the block manufacturer's guidance sets the grade; tell us what is specified and we will match it.

In Northern Ireland building work follows the Building Regulations (Northern Ireland), with guidance in the Technical Booklets, and applications go to the council's building control team.

How much will you need?

A single-skin block wall in Lisnaskea 6 m long and 2.4 m high is 14.4 m². At 10 blocks per square metre plus 5% you need 152 blocks, with about 0.21 tonnes of building sand and 2 bags of cement for the mortar at 1:4. Try the block calculator

Common questions from Lisnaskea

What is the difference between 3.6 and 7.3 N/mm² blocks?

The number is the compressive strength. 7.3 N/mm² blocks carry more load and are often specified below ground or for heavily loaded walls; 3.6 N/mm² is common for upper storeys and partitions. Follow your drawings.

How many blocks on a pallet?

It varies with the block size and maker. We confirm the pallet quantity with your price.

Can you deliver concrete blocks to a site with restricted access in Lisnaskea?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Is there a minimum order for delivery to Lisnaskea?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.