Concrete & Aircrete Blocks delivered to Kidsgrove

Choosing from our concrete blocks range

• Block paving and edgingsOn request alongside your sub-base and sand.
• Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.
• Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.
• Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.

Picking the right product

Handling heavy blocks

Health and safety guidance discourages laying very heavy blocks by hand for long periods. Lighter blocks or planning the lift can make a big difference on site.

Dense or aircrete?

Dense blocks are strong and good for sound separation but heavy; a 100 mm dense block can weigh around 20 kg. Aircrete blocks are much lighter and insulate better, which helps with energy targets, but need the right fixings.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

How much will you need?

A single-skin block wall in Kidsgrove 7 m long and 2.7 m high is 18.9 m². At 10 blocks per square metre plus 5% you need 199 blocks, with about 0.27 tonnes of building sand and 3 bags of cement for the mortar at 1:4. Try the block calculator

Planning the drop in Kidsgrove

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Kidsgrove is inside our standard mainland delivery area.

• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.

Concrete & Aircrete Blocks in Kidsgrove: questions

What is the difference between 3.6 and 7.3 N/mm² blocks?

The number is the compressive strength. 7.3 N/mm² blocks carry more load and are often specified below ground or for heavily loaded walls; 3.6 N/mm² is common for upper storeys and partitions. Follow your drawings.

How many blocks per square metre?

Standard 440 × 215 mm blocks with 10 mm joints lay at about 10 blocks per square metre of wall. Add around 5 percent for cuts.

Do you deliver concrete blocks to Kidsgrove?

Yes. We deliver across Kidsgrove, including ST7. Kidsgrove is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

How soon can concrete blocks be delivered in Kidsgrove?

We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.