Concrete & Aircrete Blocks delivered to Hythe

What concrete blocks can we deliver to Hythe?

• Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
• Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.
• Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.
• Block paving and edgingsOn request alongside your sub-base and sand.

How delivery works in Hythe

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Hythe is inside our standard mainland delivery area.

• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.

A quick quantity check

A single-skin block wall in Hythe 8 m long and 2.1 m high is 16.8 m². At 10 blocks per square metre plus 5% you need 177 blocks, with about 0.24 tonnes of building sand and 3 bags of cement for the mortar at 1:4. Try the block calculator

Getting the right concrete blocks

Handling heavy blocks

Health and safety guidance discourages laying very heavy blocks by hand for long periods. Lighter blocks or planning the lift can make a big difference on site.

What strength do I need?

Most houses use 3.6 N/mm² or 7.3 N/mm² blocks. Your structural design, your building control officer or the block manufacturer's guidance sets the grade; tell us what is specified and we will match it.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Your questions answered

How heavy is a concrete block?

It depends on the type and thickness. A 100 mm dense block is roughly 18 to 20 kg, a lightweight block noticeably less, and an aircrete block much less again.

Can I add other materials to my Hythe delivery?

Yes. Put everything on one list, from concrete blocks to fixings and PPE, and we will price it as one delivery where the products can travel together.

Is there a minimum order for delivery to Hythe?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How much mortar for blockwork?

Roughly 0.008 to 0.01 cubic metres of mortar per square metre of 100 mm blockwork, allowing for waste. Use our block calculator for sand and cement quantities.