SK Trade, sktrade.co.uk

Building Materials

Concrete & Aircrete Blocks delivery in Hoddesdon

Concrete blocks are large masonry units, normally 440 × 215 mm on face, that lay at about 10 blocks per square metre; they come as dense aggregate, lightweight aggregate or aircrete (aerated) blocks.

Trades and homeowners in Hoddesdon can order concrete blocks for delivery by sending a list, a drawing or just the sizes of the job.

Pallets of grey dense concrete blocks and pale aircrete blocks beside a blockwork wall

Your Hoddesdon delivery

Postcode districts
EN11, EN10, SG13, SG12
Delivery
Standard mainland delivery
Delivering to
Hoddesdon, Hertfordshire
Daylight
About 7h 47m on the shortest day
How it arrives
Banded pallets, usually crane offload
Nearby (straight line)
Hertford (4 mi), Cheshunt (4 mi), Waltham Abbey (5 mi)

Concrete & Aircrete Blocks we supply in Hoddesdon

  • Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
  • Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.
  • Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.
  • Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.
  • Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.

Things to check before you order

Dense or aircrete?

Dense blocks are strong and good for sound separation but heavy; a 100 mm dense block can weigh around 20 kg. Aircrete blocks are much lighter and insulate better, which helps with energy targets, but need the right fixings.

What strength do I need?

Most houses use 3.6 N/mm² or 7.3 N/mm² blocks. Your structural design, your building control officer or the block manufacturer's guidance sets the grade; tell us what is specified and we will match it.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Working out quantities for your Hoddesdon job

A single-skin block wall in Hoddesdon 4 m long and 2.1 m high is 8.4 m². At 10 blocks per square metre plus 5% you need 89 blocks, with about 0.12 tonnes of building sand and 2 bags of cement for the mortar at 1:4. Try the block calculator

Getting concrete blocks onto your Hoddesdon site

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Hoddesdon is inside our standard mainland delivery area.

  • If neighbours share the access, it helps to let them know a lorry is coming.
  • If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
  • Clear a level area for pallets, ideally on boards, so materials stay out of standing water.

Concrete & Aircrete Blocks questions

Do you deliver concrete blocks to Hoddesdon?

Yes. We deliver across Hoddesdon, including EN11, EN10, SG13, SG12. Hoddesdon is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Can I use blocks in the foundations?

Yes, using blocks made for below ground, often trench blocks or dense blocks of the specified strength. Building control will check foundation design.

What is the difference between 3.6 and 7.3 N/mm² blocks?

The number is the compressive strength. 7.3 N/mm² blocks carry more load and are often specified below ground or for heavily loaded walls; 3.6 N/mm² is common for upper storeys and partitions. Follow your drawings.

Is there a minimum order for delivery to Hoddesdon?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price