Concrete & Aircrete Blocks for Grimsby, delivered to site

What concrete blocks can we deliver to Grimsby?

• Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.
• Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
• Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.
• Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.
• Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.

Picking the right product

Handling heavy blocks

Health and safety guidance discourages laying very heavy blocks by hand for long periods. Lighter blocks or planning the lift can make a big difference on site.

Thickness

100 mm is the common inner-leaf thickness. Wider blocks (140, 190, 215 mm) are used for separating walls, single-skin garage walls and foundations.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Planning the drop in Grimsby

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Grimsby is inside our standard mainland delivery area.

• With roughly 7h 27m of daylight in Grimsby around the shortest day, morning deliveries leave more working light for the job.
• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.

Estimating your concrete blocks

A single-skin block wall in Grimsby 5 m long and 2.7 m high is 13.5 m². At 10 blocks per square metre plus 5% you need 142 blocks, with about 0.2 tonnes of building sand and 2 bags of cement for the mortar at 1:4. Try the block calculator

Common questions from Grimsby

Can you deliver concrete blocks to a site with restricted access in Grimsby?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

What is the difference between 3.6 and 7.3 N/mm² blocks?

The number is the compressive strength. 7.3 N/mm² blocks carry more load and are often specified below ground or for heavily loaded walls; 3.6 N/mm² is common for upper storeys and partitions. Follow your drawings.

How much mortar for blockwork?

Roughly 0.008 to 0.01 cubic metres of mortar per square metre of 100 mm blockwork, allowing for waste. Use our block calculator for sand and cement quantities.

Is there a minimum order for delivery to Grimsby?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.