Building Materials
Concrete & Aircrete Blocks delivery in Gerrards Cross
Concrete blocks are large masonry units, normally 440 × 215 mm on face, that lay at about 10 blocks per square metre; they come as dense aggregate, lightweight aggregate or aircrete (aerated) blocks.
SK Trade prices concrete blocks delivered to Gerrards Cross and the rest of Buckinghamshire, so the cost and the delivery date are agreed before anything is loaded.

Gerrards Cross delivery at a glance
- Delivering to
- Gerrards Cross, Buckinghamshire
- Nearby (straight line)
- Chalfont St Peter (2 mi), Uxbridge (4 mi), Rickmansworth (5 mi)
- Daylight
- About 7h 49m on the shortest day
- Delivery
- Standard mainland delivery
- How it arrives
- Banded pallets, usually crane offload
- Postcode districts
- SL9, SL3, SL2, HP9
What concrete blocks can we deliver to Gerrards Cross?
- Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
- Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.
- Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.
- Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.
Concrete & Aircrete Blocks: choosing well
Dense or aircrete?
Dense blocks are strong and good for sound separation but heavy; a 100 mm dense block can weigh around 20 kg. Aircrete blocks are much lighter and insulate better, which helps with energy targets, but need the right fixings.
Thickness
100 mm is the common inner-leaf thickness. Wider blocks (140, 190, 215 mm) are used for separating walls, single-skin garage walls and foundations.
In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.
Delivering concrete blocks in Gerrards Cross
Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Gerrards Cross is inside our standard mainland delivery area.
- Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
- Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
- Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
Estimating your concrete blocks
A single-skin block wall in Gerrards Cross 9 m long and 2.7 m high is 24.3 m². At 10 blocks per square metre plus 5% you need 256 blocks, with about 0.35 tonnes of building sand and 4 bags of cement for the mortar at 1:4. Try the block calculator
Your questions answered
Do you deliver concrete blocks to trades and homeowners in Gerrards Cross?
Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.
How many blocks per square metre?
Standard 440 × 215 mm blocks with 10 mm joints lay at about 10 blocks per square metre of wall. Add around 5 percent for cuts.
How heavy is a concrete block?
It depends on the type and thickness. A 100 mm dense block is roughly 18 to 20 kg, a lightweight block noticeably less, and an aircrete block much less again.
Is there a minimum order for delivery to Gerrards Cross?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
Also delivering concrete blocks nearby
- Concrete & Aircrete Blocks in Chalfont St Peter
- Concrete & Aircrete Blocks in Uxbridge
- Concrete & Aircrete Blocks in Rickmansworth
- Concrete & Aircrete Blocks in Slough
- Concrete & Aircrete Blocks in Ruislip
- Concrete & Aircrete Blocks in Amersham
Add to your Gerrards Cross delivery
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
