Concrete & Aircrete Blocks delivered to Esher

Our concrete blocks range for Esher jobs

• Block paving and edgingsOn request alongside your sub-base and sand.
• Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.
• Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
• Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.
• Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.

Getting concrete blocks onto your Esher site

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Esher is inside our standard mainland delivery area.

• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
• With roughly 7h 51m of daylight in Esher around the shortest day, morning deliveries leave more working light for the job.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.

Choosing concrete blocks

Thickness

100 mm is the common inner-leaf thickness. Wider blocks (140, 190, 215 mm) are used for separating walls, single-skin garage walls and foundations.

What strength do I need?

Most houses use 3.6 N/mm² or 7.3 N/mm² blocks. Your structural design, your building control officer or the block manufacturer's guidance sets the grade; tell us what is specified and we will match it.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Sizing your order

A single-skin block wall in Esher 8 m long and 2.4 m high is 19.2 m². At 10 blocks per square metre plus 5% you need 202 blocks, with about 0.28 tonnes of building sand and 3 bags of cement for the mortar at 1:4. Try the block calculator

Concrete & Aircrete Blocks in Esher: questions

What is the difference between 3.6 and 7.3 N/mm² blocks?

The number is the compressive strength. 7.3 N/mm² blocks carry more load and are often specified below ground or for heavily loaded walls; 3.6 N/mm² is common for upper storeys and partitions. Follow your drawings.

Is there a minimum order for delivery to Esher?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How much mortar for blockwork?

Roughly 0.008 to 0.01 cubic metres of mortar per square metre of 100 mm blockwork, allowing for waste. Use our block calculator for sand and cement quantities.

Can I add other materials to my Esher delivery?

Yes. Put everything on one list, from concrete blocks to fixings and PPE, and we will price it as one delivery where the products can travel together.