SK Trade, sktrade.co.uk

Building Materials

Concrete & Aircrete Blocks delivery in Dorset

Concrete blocks are large masonry units, normally 440 × 215 mm on face, that lay at about 10 blocks per square metre; they come as dense aggregate, lightweight aggregate or aircrete (aerated) blocks.

For sites in Dorset, our concrete blocks prices include delivery to your postcode, with the offload agreed when you order.

Pallets of grey dense concrete blocks and pale aircrete blocks beside a blockwork wall

Dorset at a glance

Covering
4 towns across Dorset
Postcode areas
BH, DT
Delivery
Standard mainland delivery
How it arrives
Banded pallets, usually crane offload
Neighbouring areas
Isle of Wight, Hampshire, Wiltshire

Concrete & Aircrete Blocks available for Dorset delivery

  • Block paving and edgingsOn request alongside your sub-base and sand.
  • Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.
  • Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
  • Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.
  • Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.

Concrete & Aircrete Blocks delivered in Dorset towns

How much will you need?

A single-skin block wall in Dorset 7 m long and 2.4 m high is 16.8 m². At 10 blocks per square metre plus 5% you need 177 blocks, with about 0.24 tonnes of building sand and 3 bags of cement for the mortar at 1:4. Try the block calculator

Before your Dorset delivery arrives

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Our standard mainland delivery area covers Dorset.

  • Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
  • Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
  • If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.

Picking the right product

What strength do I need?

Most houses use 3.6 N/mm² or 7.3 N/mm² blocks. Your structural design, your building control officer or the block manufacturer's guidance sets the grade; tell us what is specified and we will match it.

Thickness

100 mm is the common inner-leaf thickness. Wider blocks (140, 190, 215 mm) are used for separating walls, single-skin garage walls and foundations.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Questions about concrete blocks delivery in Dorset

How heavy is a concrete block?

It depends on the type and thickness. A 100 mm dense block is roughly 18 to 20 kg, a lightweight block noticeably less, and an aircrete block much less again.

Can I add other materials to my Dorset delivery?

Yes. Put everything on one list, from concrete blocks to fixings and PPE, and we will price it as one delivery where the products can travel together.

Can I use blocks in the foundations?

Yes, using blocks made for below ground, often trench blocks or dense blocks of the specified strength. Building control will check foundation design.

Is there a minimum order for delivery to Dorset?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price