SK Trade, sktrade.co.uk

Building Materials

Concrete & Aircrete Blocks for Berkhamsted, delivered to site

Concrete blocks are large masonry units, normally 440 × 215 mm on face, that lay at about 10 blocks per square metre; they come as dense aggregate, lightweight aggregate or aircrete (aerated) blocks.

For jobs in Berkhamsted we quote concrete blocks as a delivered price to your postcode, with the vehicle and offload method agreed up front.

Pallets of grey dense concrete blocks and pale aircrete blocks beside a blockwork wall

Concrete & Aircrete Blocks to Berkhamsted: the basics

Delivery
Standard mainland delivery
Delivering to
Berkhamsted, Hertfordshire
Nearby (straight line)
Chesham (4 mi), Hemel Hempstead (5 mi), Amersham (7 mi)
Daylight
About 7h 47m on the shortest day
How it arrives
Banded pallets, usually crane offload
Postcode districts
HP4, HP3, HP23, HP1

Our concrete blocks range for Berkhamsted jobs

  • Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.
  • Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.
  • Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.
  • Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
  • Block paving and edgingsOn request alongside your sub-base and sand.

Things to check before you order

Dense or aircrete?

Dense blocks are strong and good for sound separation but heavy; a 100 mm dense block can weigh around 20 kg. Aircrete blocks are much lighter and insulate better, which helps with energy targets, but need the right fixings.

Handling heavy blocks

Health and safety guidance discourages laying very heavy blocks by hand for long periods. Lighter blocks or planning the lift can make a big difference on site.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Sizing your order

A single-skin block wall in Berkhamsted 5 m long and 2.7 m high is 13.5 m². At 10 blocks per square metre plus 5% you need 142 blocks, with about 0.2 tonnes of building sand and 2 bags of cement for the mortar at 1:4. Try the block calculator

Planning the drop in Berkhamsted

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Berkhamsted is inside our standard mainland delivery area.

  • Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
  • Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
  • Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.

Common questions from Berkhamsted

How heavy is a concrete block?

It depends on the type and thickness. A 100 mm dense block is roughly 18 to 20 kg, a lightweight block noticeably less, and an aircrete block much less again.

Can I add other materials to my Berkhamsted delivery?

Yes. Put everything on one list, from concrete blocks to fixings and PPE, and we will price it as one delivery where the products can travel together.

Are aircrete blocks strong enough for an extension?

Many aircrete blocks are designed for loadbearing walls, but grades differ. Check the strength your design calls for and the manufacturer's guidance on use below DPC.

Can you deliver concrete blocks to a site with restricted access in Berkhamsted?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price