Timber & Sheets
Treated Carcassing Timber for Hawarden, delivered to site
Carcassing timber is strength-graded, sawn softwood used for the structural frame of a building, such as floor joists, rafters, ceiling joists and stud walls.
Building in Hawarden? Send us your list and we will come back with a delivered price for the carcassing timber and anything else on it.

Delivery facts for Hawarden
- Nearby (straight line)
- Deeside (1 mi), Buckley (3 mi), Chester (6 mi)
- Postcode districts
- CH5, CH4
- Daylight
- About 7h 32m on the shortest day
- Delivering to
- Hawarden, Clwyd
- How it arrives
- Banded packs, long-length access
- Delivery
- Standard mainland delivery
Treated Carcassing Timber available for Hawarden delivery
- Treated timberPressure treated for protection against rot and insect attack.
- C24 graded carcassingStronger grade for longer spans or smaller sections.
- Longer lengthsLengths beyond the common range to order.
- Fencing and sleeper timberTreated posts, rails and sleepers on request.
Sizing your order
A floor 4.2 m wide with joists spanning 3.3 m at 400 mm centres needs 12 joists, plus trimmers and noggins. The section and grade, such as 47 × 200 mm C24, come from span tables or your engineer; send us the timber schedule and we will price it.
Delivery to Hawarden: what helps
Timber is delivered in packs or bundles on a flatbed; long lengths need clear access along the drop point. Hawarden is inside our standard mainland delivery area.
- Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
- If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
- On busy streets in Hawarden, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
Treated Carcassing Timber: choosing well
Which treatment?
Treatment is specified by use class. Timber inside a building is usually use class 1 or 2; external timber out of ground contact is use class 3; timber in ground contact needs use class 4.
Cut ends
Treat any cut ends with a suitable end-grain preservative, especially on external work.
Wales has its own Approved Documents, including its own Part L for energy efficiency, and building control is handled by the local authority or a registered approver.
Your questions answered
What lengths are available?
Common lengths run from 2.4 m to 4.8 m in 300 mm steps, with longer lengths to order.
What does C16 and C24 mean?
They are strength classes under BS EN 338. C24 timber is stronger and stiffer than C16, which lets it span further for the same size.
Can I add other materials to my Hawarden delivery?
Yes. Put everything on one list, from carcassing timber to fixings and PPE, and we will price it as one delivery where the products can travel together.
Is there a minimum order for delivery to Hawarden?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
Treated Carcassing Timber in neighbouring towns
- Treated Carcassing Timber in Deeside
- Treated Carcassing Timber in Buckley
- Treated Carcassing Timber in Chester
- Treated Carcassing Timber in Flint
- Treated Carcassing Timber in Ellesmere Port
- Treated Carcassing Timber in Wrexham
More from SK Trade in Hawarden
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
